waveshare ESP32-S3 Development Board with 1.28inch Round Touch LCD, Accelerometer and Gyroscope Sensor, 240×240 Pixel 65K Color RGB Color Round Display, Lead to 6 x GPIO Pins, Type-C Connector

ESP32-S3 Development Board, with 1.28inch Round Touch LCD, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on. Embedded GC9A01 Display Driver And CST816S Capacitive Touch Control Chip Features Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaBuilt in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memoryType-C connector, keeps it up to date, easier to useOnboard 1.28inch capacitive touch display, 240×240 resolution, 65K colorOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestureOnboard 3.7V recharge/discharge header and 6 × GPIO pins via SH1.0 connectorSupports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenariosIntegrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functionsSmall size, touch more possibilities: suitable for various smart devices development, can realize human-computer interaction function Package Content ESP32-S3-Touch-LCD-1.28 x1

• ESP32-S3-Touch-LCD-1.28 is a low-cost, high-performance MCU board designed with onboard onboard 1.28inch capacitive touch display,recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.
• Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.
• Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.
• Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color. Embedded GC9A01 Display Driver And CST816S Capacitive Touch Control Chip .
• Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V recharge/discharge header and 6 × GPIO pins via SH1.0 connector. Type-C connector, keeps it up to date, easier to use.