Tubeless Rim Tape 10m Roll

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

• High quality rim tape
• Seals rim spoke holes ready for tubeless set-up
• 10m roll
• Muc-off vacuum technology ensures strong seal to your rim.

Instructions

1. First up, clean your rim to get rid of any unwanted residue that might be left behind from a previous setup
   
2. Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
   
3. Locate the valve hole
   
4. Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
   
5. With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
   
6. Rotate the wheel around as you continue to apply the tape
   
7. Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
   
8. Cut the tape at a 45 degree angle and press the edge down
   
9. Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
   
10. Apply the finishing patch over the edge of the tape to ensure a firm seal
    
11. Push the valve through the rim hole and secure with the 'O' ring and locking ring
    
12. Refit the tyre and inflate - you're now ready to add your sealant!