Trolling Motor: Black Fiberglass Reinforced Nylon Propeller Kit for Seamax PowerMax Models Trolling Motor

To replace the propeller, hold the blade and loosen the nut using the propeller wrench (Fig. D). Remove the nut and propeller. If propeller is stuck, hold one blade by hand and tap on the back side of the other blade with a hard blunt object. If necessary, repeat the procedure for the other blade until the propeller comes off. If propeller pin is bent, replace it. Align pin (Fig. E) when refitting propeller and tighten nut securely.

• Newly re-designed Black fiberglass reinforced composite material propeller, updated pitch, camber and thickness for high thrust application. Better performance with new propeller and minimizes efficiency lost through cavitation.
• Suitable for Seamax 2019 PowerMax edition trolling motor. Fiberglass Reinforced Black Nylon 3 Blade Propeller. Package included: Stainless steel washer, screw cap, and lock pin; (British system & metric system tighten hardware are both included)
• Replacing the Propeller (Refer to User Manual, Page 8).
• To replace the propeller, hold the blade and loosen the nut using the propeller wrench (Fig. D). Remove the nut and propeller. If propeller is stuck, hold one blade by hand and tap on the back side of the other blade with a hard blunt object. If necessary, repeat the procedure for the other blade until the propeller comes off. If propeller pin is bent, replace it. Align pin (Fig. E) when refitting propeller and tighten nut securely.