Swimables R0357500 Replacement for Clamp Ring Knob Assembly with Threaded Rod and Retainer | Compatible with Jandy DE and Cartridge Filters

Swimables R0357500 Replacement for Clamp Ring Knob Assembly with Threaded Rod and Retainer | Compatible with Jandy DE and Cartridge Filters. Compatibility: This Jandy filter clamp ring knob assembly will work on CV340, CV460, CV580, CL340, CL460, CL580, DEV48, DEV60, DEL48, and DEL60 Zodiac Filters. Compatibility 2: Will also work on CL580 parts, Jandy CV340 Filter, Jandy CL580 Cartridge Filter, Jandy DEV 60 Filter. Installation Instruction: Relief the air within the filter using the air relief portion of the air relief assembly. Using a 9/16 inch wrench size, slowly undo the brass nut to remove the clamp. Installation Instructions 2: Install the new brass sleeve nut into the spring the same way the old one was taken out. Tighten the nut until the clamp is securely shut. Note: It is always recommended to clean the filter once opening it to change out the nut in order to reduce any excess pressure that may have been built up due to debris.

• Compatibility: This Jandy filter clamp ring knob assembly will work on CV340, CV460, CV580, CL340, CL460, CL580, DEV48, DEV60, DEL48, and DEL60 Zodiac Filters
• Compatibility 2: Will also work on CL580 parts, Jandy CV340 Filter, Jandy CL580 Cartridge Filter, Jandy DEV 60 Filter
• Installation Instruction: Relief the air within the filter using the air relief portion of the air relief assembly. Using a 9/16 inch wrench size, slowly undo the brass nut to remove the clamp.
• Installation Instructions 2: Install the new brass sleeve nut into the spring the same way the old one was taken out. Tighten the nut until the clamp is securely shut.
• Note: It is always recommended to clean the filter once opening it to change out the nut in order to reduce any excess pressure that may have been built up due to debris.