SeeedStudio - Bus Pirate v3.6 - Universal Serial Interface - DIY Maker Open Source BOOOLE

Bus Pirate v3?is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. A laser cut acrylic case for Bus Pirate v3.6 is also available.Protocols1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols. Features: - USB interface, USB powered- 5volt tolerant pins- 0-6volt measurement probe- 1Hz-40MHz frequency measurement- 1kHz-4MHz pulse-width modulator, frequency generator- On-board multi-voltage pull-up resistors- On-board 3.3volt and 5volt power supplies with software reset- Macros for common operations- Bus traffic sniffers (SPI, I2C)- Transparent USB to serial bridge mode- 10Hz-1MHz low-speed logic analyzer- Custom support in?AVRDUDE?,?Flashrom?,?OpenOCD- AVR STK500 v2 programmer clone- Scriptable from Perl, Python, etc.- A bootloader for easy USB firmware updates- Uses?DP6037 standard PCB layout- Open source (CC 0/Public Domain)

• USB interface, USB powered. 5volt tolerant pins. 0-6volt measurement probe. 1Hz-40MHz frequency measurement. 1kHz-4MHz pulse-width modulator, frequency generator. On-board multi-voltage pull-up resistors.
• On-board 3.3volt and 5volt power supplies with software reset. Macros for common operations. Bus traffic sniffers (SPI, I2C). Transparent USB to serial bridge mode. 10Hz-1MHz low-speed logic analyzer. Custom support in AVRDUDE , Flashrom , OpenOCD.
• AVR STK500 v2 programmer clone. Scriptable from Perl, Python, etc. A bootloader for easy USB firmware updates. Uses DP6037 standard PCB layout. Open source (CC 0/Public Domain).