Round Belt Welder, Electric Connector Fuser Polyurethane Strips Bonding Machine Welding Machine Hot Melt PU Belt Heater

Round Belt Welder, Electric Connector Fuser Polyurethane Strips Bonding Machine Welding Machine Hot Melt PU Belt HeaterParameter: 1. Conditions of use: The altitude does not exceed 1000 meters; Ambient temperature: -20 C -50 C Relative humidity: 45%-95% Voltage range: 501Hz 2. Safety indicators: Insulation resistance is not less than 1MΩ Leakage current: 5mA (AC RMS) Packing list: 1 * PU PP-R PE Round Belt Welder Note: The black or orange is shipped randomly. The product is suitable for diameter of 2-40mm PU cable. PU Round Belt is not included Instructions: Before using the PU pp-r pe Round Belt Machine, check whether the machine part is intact, install the temperature switch, and then turn on the power. The green indicator light is on. The corresponding tick mark adjusts the temperature to about 150 C. The red light is on. At this time, the temperature rises and the temperature is reached. The red light is extinguished when required. Indicates that the machine enters the automatic control state and can start operation. Note: 1. During use, hands and flammable materials should not touch the hot melt. 2. If it is red, the green indicator light will not change for a long time, indicating that the machine is faulty, stop working immediately, and cut off the power. 3. The temperature of the machine has been adjusted at the factory, non-professionals are not allowed to adjust at will, so as not to affect the normal use and life of the machine. 4. The round band in the picture is not included and it's only used for display.