Pico 2 W Starter Kit Comes with Pre-Soldered Header Pico 2 W Board Based on RP2350 Dual-Core & Dual-Architecture, Experimental Board +Pico 2W Case+ Jumper Wires+USB Cable (4 Items)

Key features Official RP2350 microcontroller chip designed by RPi in the United Kingdom Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2 520KB of SRAM, and 4MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 x multi-function GPIO pins 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels. Temperature sensor 12 × Programmable I/O (PIO) state machines for custom peripheral support Package Content Pi Pico 2 W with pre-soldered header (mono) x1 Acrylic protective case (top and bottom) x1 Experimental board + jumper wires x1 USB-A to micro USB cable ~1.2m x1

• This is Pico 2 W Starter Kit Comes with Pre-Soldered Header Pico 2 W Board Based on RP2350 Dual-Core & Dual-Architecture, Experimental board +Pico 2W Case+ Jumper Wires+USB Cable (4 Items)
• RPi Pico 2 W Microcontroller Board (with pre-soldered header (mono)), Based on Official RP2350 Chip, Dual-core & Dual-architecture Design. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz.
• Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2. 520KB of SRAM, and 4MB of on-board Flash memory.
• Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB.
• 26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support.