Multifunctional Central Air Conditioning Condenser Duct Cleaning Machine 370W Rotary Brush Heat Exchanger Pipeline Cleaner with High Pressure Pump Applicable Diameter 0.2-0.8in 220V/110V

Parameter Voltage: 220V Single-phase (Note: One 110V transformer is included as a free gift.) Power: Cleaning machine 370W + High pressure pump 1700W Rotating speed: 0-1400rpm Diameter of flexible shaft: 12mm (0.5in) Length of flexible shaft: 7.6m (24.9ft) Nylon brush: Φ22mm (0.9in) * 10pcs Applicable pipeline diameter: 6-20mm (0.2-0.8in) Quick connection water pipe: 20m (65.6ft) Foot switch: 3m (9.8ft) Rated water pressure: 100Bar Adjustable pressure range: 0-22Mpa Water volume: 7L/min High pressure water pipe: 8m (26.2ft) Self-suction hose: 1.8m (5.9ft) Machine size: 26.5*49*44cm (10.4*19.3*17.3 inches) Net weight: 52.5kg (115.7LBs) Shipping Weight: 151LB Outer Packaging Size: 24.02*24.02*26.38in Precaution 1. Before starting the machine, ensure the flexible shaft is fully unwound. Otherwise, the shaft core may be broken. Customers shall bear the cost of replacement parts for any damage caused thereby. 2. Wear safety goggles and protective gloves before operation. Do not touch the transmission device to avoid hazards while the equipment is in operation. 3. Place the equipment on a clean, dry and stable ground. Keep the equipment clean at all times. 4. Do not use the equipment when the ambient temperature exceeds 40˚C. 5. The equipment must be grounded. Ensure the power supply parameters match the specifications of equipment. 6. The minimum bending diameter of the flexible shaft is 50cm. Straighten the flexible shaft as much as possible to prevent the shaft core from kinking and prolong the service life. 7. Ensure that the water inside the equipment does not freeze. 8.If the flexible shaft is not to be used for a long period of time, the head of the flexible shaft should be disassembled, wiped dry and coated with anti-rust oil. Item included One Set of Multifunctional Central Air Conditioning Condenser Pipeline Cleaning Machine(022875)

• Three Cleaning Modes: Tube cleaning removes dirt, scale and rust without pipe damage. High-pressure cleaning with 100Bar powerful pressure easily washes away surface contaminants. Self-priming mode works well in environments without tap water, equipped with a water filter to prolong the service life of the equipment.
• Cornering Ability: The cleaning machine can easily pass through bends, suitable for straight, U-shaped and S-shaped pipes with high flexibility. Suitable for cleaning pipes with a diameter of 6-20mm (0.2-0.8in). Adjustable pressure with built-in pressure relief valve automatically releases excess pressure to extend pipeline service life.
• Powerful Motor: A 370W tube cleaning motor and a 1700W high-pressure pump delivers strong and stable power. The flexible shaft and brush head rotate at high speed inside the pipeline under the drive of the motor, breaking through the hard dirt inside the pipeline.Physical descaling and strong cleaning ability.
• Flexible Shaft: The 7.6M flexible shaft easily navigates through pipes and reaches inaccessible areas beyond the reach of traditional cleaning tools. Dry wet separation protects the host, water enters the flexible shaft directly, preventing water from entering the main unit due to seal damage and extending its service life.
• Application: 0-1400r/min adjustable speed, stepless variable frequency control, suitable for various working conditions. As a professional pipeline cleaning equipment, it enjoys wide application in centrifugal water chillers, screw water chillers, condensers, ground source heat pumps, marine oil coolers, tube heat exchangers.