Mora Carving #120 (Original) Laminated Blade

★★★★★ 4.5 99 Bewertungen

€14.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.2connecttogether.nl
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€14.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 01.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.2connecttogether.nl
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 243265848 Erscheinungsdatum 2026/07/20 Listenpreis €14.00 Modellnummer 243265848
Kategorie

Mora Carving #120 Laminated Carbon; A traditional Scandinavian carving knife. This is a detail knife with a blade of laminated carbon steel. The core of the blade is hardened to 61 - 62 on the Rockwell C scale for the finest of edges. The handle is generously sized for a solid grip. This knife comes with the Black polymer Sheath with belt loop. Other sheaths we carry that would fit this piece are noted below:

  • JRE-Model G
  • Samson 6BR or 6NA

Item Details:

  • Carbon Steel Blade
  • Blade Length: 2 1/4"
  • Blade Thickness: .114"

The craft classic – the perfect basic knife

With its short, narrow and pointed blade, the Slöjdkniv 120 (LC) is specially designed for finer carving and detail work. The 2.7 mm thick blade is made of laminated carbon steel, which is tough and can therefore withstand repeated side bending. It has a spool-shaped handle in Scandinavian birch and a full tang that provides both strength and stability. A perfect basic knife for beginners and experienced craftsmen.

Shorter blade for finer carving

The 120 (LC) craft knife has a shorter blade of 62 mm with a narrow and pointed shape, excellent for finer carving where you want to make precise cuts. The knife has a coil-shaped birch handle that lies comfortably in the hand during long use and that you can adjust for the best fit. The full tang that runs through the knife provides good stability and control.

Laminated carbon steel that can withstand lateral bending

The Slöjdkniv 120 (LC) has a 2.7 mm thick blade made of French laminated carbon steel (100CR6), where the core consists of carbon steel surrounded by softer steel. This gives the knife high edge retention and a toughness that can withstand lateral bending when carving. After heat treatment in our knife factory in Mora, the blade reaches a hardness of 58.5 HRC. The blade has a polished surface that protects against rust. To extend the life of the blade, wipe and oil the blade after use. The knife is made in our knife factory in Mora with over 130 years of craftsmanship tradition.


Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.5 von 5
★★★★★
99 Bewertungen | 41 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
83% (82)
4 Sterne
4% (4)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (10)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.