KEYENCE FS-N11CP Digital Display Fiber Amplifier Sensor New

KEYENCE FS-N11CP Digital Display Fiber Amplifier Sensor NewSpecifications:Model: FS-N11CPType: Standard 1 output M8 connector*1Output: PNPMain unit/expansion unit: Main unitControl output: 1 PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or lessExternal input: 1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)Light source LED: Red, 4-element LEDAPC: ON/OFF switchable (Factory setting: OFF)Response time: 50 μs (HIGH SPEED) /250 μs (FINE) /500 μs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Number of interference prevention units: 0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)Unit expansion: Up to 16 units can be connected total (two output type is treated as two units)Rating:1. Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less2. Current Consumption: Normal: 950 mW or less (39 mA max. at 24 V, 52 mA max. at 12 V)*2 Eco on mode: 850 mW or less (35 mA max. at 24 V, 44 mA max. at 12 V)*2 Eco Full mode: 520 mW or less (21 mA max. at 24 V, 26 mA max. at 12 V)Environmental resistance:1. Ambient light: Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less2. Ambient temperature: -20 to +55 °C -4 to +131 °F (No freezing)*33. Relative humidity: 35 to 85 % RH (No condensation)4. Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions5. Shock resistance: 500 m/s2, 3 times in each of the X, Y, and Z directionsCase material: Both main unit and expansion unit housing material: PolycarbonateWeight: Approx. 22 g

• Model: FS-N11CP
• Type: Standard 1 output M8 connector*1
• Output: PNP
• Main unit/expansion unit: Main unit
• Control output: 1 PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less