JTS Rathburn Ring Stretcher Enlarger Jewelry Ring Sizing Tool Band Sizer

🟢 RATHBURN RING STRETCHER 🟢 RING ENLARGER SIZING EXPANDER TOOL 🟢 A Ring Stretcher, a basic way to enlarge jewelry rings, is the most economical and simplest method to stretch rings and it is easy to use. 🟢 The Rathburn fixture consists of 2 parts, a steel Collet Multi-Stepped Mandrel and Tapered Pin Expander. 🟢 Place the ring on the stepped collet, choose the size that the rings fits onto, then place the expansion collet on the nylon base. 🟢 Now insert the Tapered Pin Rod and gently tap the tapered steel Pin by using a mallet or hammer (light Impact). 🟢 Make sure not to oversize the ring, and cause it to break apart. Mandrel can be removed by simply tapping the opposite end. Note: Care must be taken whenever stretching a ring. 🟢 Tool is not to be used with stone set rings, thin shanks, inspect for any solder joints that may break apart when stretching. 🟢 Tool works well with Bands, may need to anneal to soften the ring to afford expansion of the metal. 🟢 Generally this tool fixture will not expand more than 1 finger size. 🔻 SPECIFICATIONS: JETS Product # 1801-011 🔻 🔸 Construction: Machined Steel 🔸 Ring Size Capacity: 8 - 15 Finger Size US 🔸 Steps on Collet Holder: 7 - Each having a Width of 1/4" + 🔸 Fixture Tool: 3 Parts - Plastic Base - Stepped Collet Holder - Tapered Pin 🔸 Overall Length: 6-1/4" 🔸 Plastic Base: 1-11/16" Round - 1-23/64" Height 🔸 Weight: 11.5oz

• 🟢 Construction: Machined Steel
• 🟢 Ring Size Capacity: 8 - 15 Finger Size US
• 🟢 Steps on Collet Holder: 7 - Each having a Width of 1/4" +
• 🟢 Fixture Tool: 3 Parts - Plastic Base - Stepped Collet Holder - Tapered Pin
• 🟢 Overall Length: 6-1/4"
• 🟢 Plastic Base: 1-11/16" Round - 1-23/64" Height
• 🔻More information on product description🔻