Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer & Adapter, Slide Hammer Attachment Bearing Puller Set with 63mm 48mm CV Joint Fork Adapter&CV Joint Puller Propshaft Separator Tool

Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer & Adapter, Slide Hammer Attachment Bearing Puller Set with 63mm 48mm CV Joint Fork Adapter&CV Joint Puller Propshaft Separator Tool

• Wih 63mm 48mm Joint Fork: This slide hammer bearing puller set includes opening 63mm and 48mm CV joint fork removing adapters, the CV joint fork is threaded internally, and the slide hammer stick is threaded externally. The joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most vehicle models and have a wide range of uses.
• Easy to Use: Attach the CV joint fork removing adapter to your slide hammers with 5/8-inch x 18 threads, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easy, yet powerful.
• Upgrade Design: This CV joint axle removing tool is easier to pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts.
• EASY TO USE: The CVJ CV axle removal tool quickly separates the CV Joint from the axle without removing the drive shaft. Overall CV joint tool dimension:9.4"x 5.75"(23.9cm x 14.6cm); Maximum CV joint diameter: 3.7"(95mm).
• ADJUST THE DIAMETER: 0.7-inch (17mm) clamping bar minimum shaft diameter; Works on CV joint shafts with 0.7-inch (17mm) or larger diameters of the groove where the rubber boot is clamped to the shaft; We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft (Requires rings to hold on to; Not designed for use on smooth shafts).