Industrial Isolated USB to RS232/485 Converter Adapter, Onboard Original FT232RNL Chip,Wall-Mount and Rail-Mount Support,Compatible with Linux, Android, Win11/10/8.1/8/7, etc.

Introduction Industrial Grade Isolated USB TO RS232/485 Converter, adopts the original FT232RNL, an industrial rail case design, built-in protection circuits such as power isolation, ADI magnetic coupling isolation, and TVS. USB TO RS232/485 (B) is easy to operate, and can automatically transmit and receive without delay. Specifications Host port--USB Device port --RS232/485 USB Operating voltage--5V Connector --USB-B Protection --200mA self-recovery fuse, output isolation Transmission distance--About 5m Isolated RS232 Connector --Screw terminal Transmission distance--About 15m Transmission mode--Point-to-point Baud rate--300bps ~ 921600bps Isolated RS485 Connector --Screw terminal Direction control --Hardware automatic control Protection--600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) Transmission distance--About 1.2km (low rate) Transmission mode --Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) Baud rate--300bps ~ 921600bps LED indicators PWR --Red power indicator, lights up when there is USB connection and voltage is detected TXD --Green TX indicator, lights up when the USB port sends data RXD --Blue RX indicator, lights up when the device ports send data back Appearance Enclosure Rail-mount ABS case, suitable for 35mm DIN rail. Dimensions: 81.9 × 54.0 × 32.0mm Operating environment Temperature:-15℃ ~ 70℃; Humidity: 5%RH ~ 95%RH Operating system : compatible withMac, Linux, Android, WinCE, Windows 11 / 10 / 8.1 / 8 / 7 Comes with Online Development Resource: n9.cl/utc0s Package Content USB TO RS232/485 (B) x1 USB-A male to USB-B male cable ~1.2m x1 Screwdriver x1

• USB TO RS232/485 Industrial Grade Isolated Converter, Onboard original FT232RNL chip. Fast communication, stable and reliable, better compatibility.
• Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
• Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic.
• Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance. Onboard 120R terminal resistor on the RS485 interface, enabled/disabled via jumper.
• Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective.