High Lifter Front Forward Upper & Lower Control Arms Compatible with Can Am Defender XMR UTV | For 2020-2025 HD10 Models | with Pre-Installed Upgraded Ball Joints (Black)

Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.

• QUALITY & DESIGN MEET: Control arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. High Lifter's precision manufacturing process ensures each control arm installs exactly like the factory arm.
• PREMIUM CONSTRUCTION: 25% larger than average stock arms - Crafted from 1 ¼” DOM steel; up to 2.5x the wall thickness of an average stock arms - .188” wall thickness; grease fittings included for most models
• EASY INSTALL: Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation
• READY TO GO: These control arms include preinstalled upgraded ball joints, hydraulically pressed to insure correct pressure and alignment, also making sure the clip is fully seated and secured. One less thing to do before getting out there with these new control arms on your vehicle
• NOTE: Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner