Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Tip Removal Tool With Hole Cleaning Brush

HOW TO USE:You can check the Instructional video below the listing or search "juyeer headphone plug extraction tool" on youtube.1. Try to shake off any loose pieces from the broken headphone plug that may fall off the jack2. Insert the pointed end of the tube into the headphone jack hole with the effort by hand. If pushing it by hand does not work, try to very lightly and slowly tap it in. 3. If you feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out.4. If the broken plug is not all taken out, proceed with the other one, the headphone jack remover. Use the same method as above.Package Contents:6 × 30mm*3.5mm diameter headphone plug extraction tool1 × 70mm*20mm*4mm diameter Custom headphone hole cleaning brush as a giftNOTE:​ Depending on how the headphone plug was broken off in the device, it may not be possible to be removed without disassembling the device and therefore the steel tube would not work in that situation. Also, please note that the jack connectors inside your device may have been damaged when the plug was initially broken off and even if the broken piece is taken out, the headphone jack may still be damaged.

• ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
• ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
• ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough because the headphone hole is 0.55 inch deep. Then squeeze the end of the metal tube and pull it out.