Engraver,* 200 Area P7 30w Diy 200 * 200 Metal Wood Leather With 200 * Metal Wood 200 Area Diy Hine With Wyan Koeb PLUG

ATOMSTACK P7 30W Laser Engraver Desktop DIY Engraving Cutting Machine with 200*200 Engraving Area Compression Fixed-focus Laser for Metal Wood Bamboo Leather machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. With knob for easier to adjust height of and a horizontal gyroscope auto stop working when it is tilted. Engraving can be done without adjusting focal length; newly upgraded compressed increases energy concentration by 200%, and size is only 0.02mm², which can take into account both precision engraving and high-energy cutting. At same time, of fixed-focus is more stable than that of zoom . all-aluminum alloy anodized structure design makes machine more durable and improves accuracy of engraving. portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes. -retardant filter panoramic can filter 97% of ultraviolet light, which plays a very good role in protecting your eyes. You and people around you do not need to wear goggles, you can also clearly Watch engraving. Reduce cost of your goggles and inconvenience of wearing goggles. is retardant and safer to use. adopts 4-fold lens group collimation and focus technology, optical is 4.5~5W, focus area is reduced to 0.02mm², high-density can easily cut 10mm thick wood boards and 6-8mm black acrylic ; Can directly engrave mirror stainless steel metal and ceramics.<br><br>Note:<br>When operating engraving machine, please install protective cover. If it is not installed, you need to wear goggles.<br>Please do not emitter with your hand, or it may burn your hand.<br>Please strong impact on machine.<br>Children under 14 are not allowed to use this product and children over 14 need adult supervision.<br>light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to operator or burn .<br><br>Specifications:<br>Cutting Material:cardboard, non-woven fabric, veneer, acrylic, some thin board, sponge, MDF, leather;<br>Protective Cover: user's eyes and pets from grabbing .<br>Package Weight:4691g/10.3lb<br>Output :4.5-5W<br>Machine Size:382*420*146mm/ 15*16.5*5.7n<br>Model:ATOMSTACK P7 M30<br>Length:445 ± 5nm<br>Machine Weight:3kg/ 6.6lb<br>Focusing Method:fixed focus , no need to focus<br>Data transmission Method:USB connection.<br>Operating Software:Compatible wiith LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.<br>Engraving Size:Recommend Print Size 200*200mm<br>:30W<br>Input Voltage:AC100-240V, 50/60Hz<br>Engraving Materials:wood, bamboo, cardboard, , leather, MDF, slate, lacquered metal, mirror stainless steel;<br>Frame Material:Aluminum alloy<br>Package Size:490*275*135mm/ 19.2*10.8*0.5in<br>Size:0.02<br>Output Voltage:DC12V, 3A<br>Engraving Accuracy:0.01mm<br>Input Format:NC, BMP, JPG, PNG, DXF, etc.<br><br><br>Packing List:<br>Hexagonal Wrench*2<br>Cutting Pad *1<br>Acrylic Sheet*3<br>Assembly block*4<br>Y- Belt Assembly*1<br>Adapter*1<br>Wood Chips*3<br>Foot Pad Foam*4<br>Open Wrench*1<br>Marker *1<br>Module*1<br>Screw*4<br>Cord*1<br>Slide*1<br>Upper Support Foot*1<br>Fixed Focus Film*1<br>Cable Tie*5<br>USB Cable*1<br>Control Box*1<br>X Assembly*1<br>Lower Support Foot*1<br>Y Assembly*1<br>

• Eye-protection Flame-retardant Filter Panoramic : The flame-retardant filter panoramic can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The is flame retardant and safer to use.
• Easy Installation: The all-aluminum alloy anodized structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes.
• Newly Upgraded Ultra-fine Compression Laser: the laser adopts 4-fold lens group collimation and focus technology, the optical power is 4.5~5W, the laser focus area is reduced to 0.02mm², the high-density laser can easily cut 10mm thick wood boards and 6-8mm black acrylic ; Can directly engrave mirror stainless steel metal and ceramics.
• Wide Compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
• Upgraded Version of High-performance Fixed-focus Laser: Engraving can be done without adjusting the focal length; the newly upgraded compressed spot increases the energy concentration by 200%, and the spot size is only 0.02mm², which can take into account both precision engraving and high-energy cutting. At the same time, the laser power of fixed-focus laser is more stable than that of zoom laser.