DMX 2x512 Ethernet Lighting Controller Interface Art-Net Node Network Converter Expander with LCD Display Screen,2 Universe,NIC Speed 100Mbps for Extending DMX Ports(Black)

DescriptionCR021R is a standard Art-Net Node so you can use the device with any application, console, or controller that supports Art-Net to distribute Art-Net data via the Ethernet network. Commonly the CR021R can be used to extend the DMX output ports of tiger touch and MA2.SpecificationMaterial: Aluminum, IC Integrated Circuit ComponentsColor: BlackShape: RectangularType: Network Converter, ExpanderMount Type: Hook MountGross Weight: 0.86kg/1.90lbsProduct Weight: 0.70kg/1.54lbsPackage Size: 24*14*6cm/9.45*5.51*2.36inchProduct Size: 12.5*12.3*3.5cm/4.92*4.84*1.36inchPower Supply: AC90-240V/50-60HzNIC Speed: 100MbpsDMX512 Output: 2 UniverseDMX512 Channels: 2x512ApplicationIt is used to control all kinds of stage lamps and lanterns, suitable for bars, stages, and other placesPackage Included1 x Lighting Controller1 x Power Cord1 x Ethernet Cable NotesPlease allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• ✅Two Power Supply Modes: The network expander supports power frequency AC and network POWER over Ethernet (POE). You can use existing network cables instead of power cables for power supply, which is very convenient.
• ✅Indispensable Device: Large lighting control equipment is now the only network output interface (support ArtNet protocol output), so if you want to control the operation of the lamp must be through the extender to convert ArtNet data into DMX512 data.
• ✅Powerful Controller: This lighting console can be used to expand the number of channels of the tiger console and MA console so that more lamps can be controlled.
• ✅Computer Connection: It can be directly connected with computer connection support with ArtNet protocol control software docking use.
• ✅Easy to Install: There is an M10 screw hole on top of the node box, which you can easily mount to the truss using a stage light clamp.With the led display and 4 function buttons, you don't need to find some applications or a web configuration to set it up.