Digital Benchtop LCR Meter LCR Bridge with Continuous Test Frequency 10Hz～20kH for Inductors, Cores, Capacitors, Resistors, Transformers and Other Components Into The Material Detection

Features:● True colour 16M colours, TFT-LCD display. ● Storage of 999 LCD screen files, trigger delay, automatic alignment control (ALC). ● Calibration function: full range open circuit and short circuit sweep zero, three groups of user point frequency calibration. ● Multi-frequency test: Support 10 frequency sweep test. ● Multi-level test: support 10 level sweep test ● 10 groups of file management, can be completely stored instrument status, list sweep settings and comparator settings. ● Enhanced Comparator (Sorting) Function: Programmable P1~P9 nine-speed sorting, display and output of main parameters HI, IN, LO, display and output of NG, AUX, SREJ, IDX, EOM. ● Absolute bias (ABS) comparison method, relative bias (PER) and sequential (SEQ) comparison method. ● Switchable auxiliary gear (AUX) sorting. ● Programmable from 1 to 200 averaging times to provide stability. ● Customisable sorting result signal. ● Built-in RS232C interface and Handler interface. ● 1000V shock protection specifications● Measurement parameters: Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdeg DCR● Basic Accuracy Slow/Medium speed: 0.05%; Fast: 0.1%● Test frequency: 10Hz～20kHz (resolution 0.001Hz)● Test range: Auto, manual and nominal range, 9 ranges● Test speed: 40 times/sec, 10 times/sec, 3 times/sec● Display range: L: 0.00001μH-9999.99HC: 0.00001pF - 9999.99μFR,X,Z: 0.00001Ω - 99.9999MΩD, 0.00001 - 9.99999Q: 0.00001 - 99999.9Δ%: -99999999% - 999999%θ(deg): -179.999° -179.999°θ(rad):-3.14159 - 3.14159DCR: 0.00001Ω ~ 99.9999MΩ● Output Impedance: 30Ω, 50Ω and 100Ω● Monitoring Parameters: Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ%● Readings Full 6 digits for all parameters: 999999● Equivalent mode: Series and parallel equivalent● Signal Level: 10.00mV~2.00V AC (Constant Level Support)100.0μA~20.00mA AC (support constant level)● DC Bias: -2.5V~+2.5V (0.5%+0.005V)● Average number of times: 1~256● Trigger Method: Internal, Manual, External and Remote● Trigger Delay: 0.01ms~60s● Comparator: 14 steps of sorting, 10 sets of compartmentalised steps, 1 set of unqualified steps, and1 group of subparameter failed file● Function of file counting: file counting 999999● List scanning: 10 steps (frequency, voltage and current)● Comparison mode: Sequential/absolute deviation/relative deviation● Calibration: Open-circuit clearing, short-circuit clearing (sweep and spot)● Files: Internal storage of 10 filesExternal USB storage of 10 files Data logging: 9999 sets of files (.csv)● Audible Function: Off/Pass/Fail● Interface: RS232/USB/HANDLER (standard) RS485/GPIB (optional)● Communication protocol: SCPI/Modbus● Other Functions: Auto LCZ● Power Requirements: AC 100V-240V, 50Hz-60Hz20W MAX● Dimensions and Weight: 264 (W)x107 (H)x350 (D) 3kg, net weight

• True colour TFT-LCD display, large font display, more intuitive readings, for laboratory quality control, incoming material inspection and component sorting, 10Hz ~ 20kHz continuous frequency, resolution of 0.001Hz, test signal level 0.01Vrms ~ 2.00Vrms (10mV step), DCR measurement and internal DC bias (DC BIAS), ±2.5V. , ±2.5V).
• It can test 4 parameters of components at the same time, and each parameter can be configured arbitrarily. The new and improved instrument realises the full 6-digit display of main and vice four parameters, and scans 10 kinds of frequency or level lists, and it can also be calibrated for 3 groups of user frequencies to improve the accuracy. Built-in comparator, through the HANDLER interface combined with PLC to complete the automatic sorting of components.
• Measurement parameters Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdeg DCR