Chimney Fan, Flue Fan, Smoke Evacuator Fireplace Exhaust Fan, Chimney Draft Inducer Chimney Exhaust Fan for Barbecue Air Extractor,60w 6 Leaves

The most widely used and recognized smoke evacuator in smoke extraction systems. Thanks to the classic system, an ideal balance is achieved between ease of installation and safe use, thanks to the high quality while following the most stringent parameters of European certification.Product weight: 2.4KgVoltage: 190-240Vnote1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire2. When installing or removing, please turn off the power switch to avoid electric shock.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.Package Included1 *Induced draft fan

• * 50w, 60W, 80w, 100w Chimney Fan for Flue Diameter 13-22cm, 100w 12 leaves,50w 3 leaves,60w 4 leaves,60w 6 leaves,60w 7 leaves,80w 7 leaves
• * Note! ! ! The product's operating voltage is 190-230v, ( 110V-120V voltage, we will be equipped with a voltage converter) and the chimney induced draft fan is used by leaving two wire ends to connect to the power source.
• * It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney. Not only will the smoke be discharged quickly, but it also has excellent performance.
• * Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install.
• * During installation or removal, disconnect the power supply to prevent electric shock.Install the power cord with at least 0.5 square copper wire.