Chimney Fan 80W 4 Leaves, Electric Chimney Fan Flue Chimney Exhaust Fan, Induced Draft Fan for Barbecue Air Extractor

Power；80WSize; base diameter 13.5-20cmmColor: GreenProduct weight: 2KgNote1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire2. When installing or removing, please turn off the power switch to avoid electric shock.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the Best effect.5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.Package Included1 *Induced draft fan

• * Note! ! For Flue Diameter 13.5-20cm.The Input Voltage is 220v, ( 110V-120V voltage, we will be equipped with a voltage converter).the chimney induced draft fan is used by leaving two wire ends to connect to the power source.
• * This Type of Induced Draft Fan is Used on Household Chimneys /Fireplace , and the Outlet Temperature Should Not Exceed 80 Degrees. The Induced Draft Fan Should Be More Than 6 Meters Away from the Fire Source.Otherwise the Induced Draft Fan Will Be Burnt.
• * This Chimney Fan very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney. Not only will the smoke be discharged quickly, but it also has excellent performance.
• * Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. Not only will the smoke be discharged quickly, but it also has excellent performance.
• * Chimney Fan is for use where flue gas temperatures do not exceed 575° F for intermittent operation, and 482° F for continuous operation.Otherwise, the induced draft fan will be burned.