Azel D-508F: NON-PROGRAMMABLE DIGITAL SLAB SENSING THERMOSTAT FOR HYDRONIC RADIANT FLOOR HEATING by Azel Technologies Inc.

D-508F 24Vac digital non-programmable hydronic radiant floor heating heat only thermostat is designed to control either ambient(air) temperature (A Mode) or floor temperature (F Mode) or a combination of ambient temperature with floor temperature limits(AF Mode). An auxiliary remote sensor is provided to measure slab temperature in order to control the floor temperature(within maximum and minimum limits in AF Mode). It can also be used for sensing the outdoor temperature in A Mode. FEATURES: Large LCD display QuickSet feature allows instant setpoint adjustment without entering the SETTING mode Selectable display in °F or °C On/Off switch to shut off relay output or shutdown the thermostat at end of heating season for added security EEPROM memory retains control settings in the event of a power failure Lockout mode to prevent tempering by unauthorized personnel One stage heating application Backlit option: Auto (60 sec.)/OFF/ON Supplied with 10ft P-01 floor sensor SPECIFICATIONS: Display Format: Liquid Crystal Display(LCD) with backlit Power Input : 24VAC ±10%, 50/60Hz, 0.5VA Contact Rating: 2A 24VAC Selectable display in °F or °C Setpoint Range (ambient): 34-100°F(1-38°C). Default setting: 70°F (21°C) Floor Temperature Control Range: 34-122°F(1-50°C) Default setting: 82°F (28°C) Maximum Floor Temperature Limit(AF Mode): 35-122°F(2-50°C) Default: 82°F(28°C) Minimum Floor Temperature Limit(AF Mode): 34-121°F(1-49°C) Default: 40°F(5°C) Temperature Display Range: -22 to 131°F(-30 to 55°C) Switching Differential: A/F/AF Mode: 0.5/1.0/1.5/2°F(°C), Default: 1°F/1°C Sensor Probe: P-01 10kΩ thermistors, 10" lead, 3/8"(9.5mm) OD x 13/16"(20.6mm) length Operating Temperature: 32 - 122°F (0 - 50°C) Dimension: 3.62"W x 2.99"H x 0.91"D(92 x 76 x 23mm) Weight: 0.32 lb. (145 g) Storage: -4 to 120°F (-20 to 50°C) Material: Flame retardant plastic

• Power Source: 24VAC (Not Battery Operated)
• Easy-to-Read Digital Multi-Display with backlit which provides constant readout of two sensor temperatures(eg. ambient and floor) and setpoint simultaneously, functional status and control settings.
• Three temperature control modes: A Mode : controls ambient temperature F Mode : controls floor temperature. Also displays current ambient temperature. AF Mode: controls the ambient temperature and maintains the floor temperature within the desired minimum limit for floor warming and maximum limit for protecting floor coverings. Also, displays current floor temperature.
• QuickSet feature allows instant setpoint adjustment without entering the SETTING mode
• Easy installation and setup
• Selectable display in °F or °C
• EEPROM memory retains control settings in the event of a power failure
• On/Off switch to shut off relay output or shutdown the thermostat at end of heating season for added security
• Backlit option: Auto (60 sec.)/OFF/ON
• Supplied with P-01 floor sensor with 10 ft. lead