ATB- 100 Pack LED Strip Light Mounting Brackets, Self-Adhesive & Screw-in Dual Installation, LED Clips for 8-10mm (0.31-0.39in) Width, Height <2.8mm (0.11in) Indoor Strip Lights, Include 102 Screws

Compatible LED Strip Types: · IP20/IP65 COB & FCOB (320/480/512/608 LEDs/m) · IP20/IP65 SMD5050 (30/60/90 LEDs/m) · IP20/IP65 SMD5630 (30/48/60/120/144 LEDs/m) · IP20/IP65 SMD2835 (30/60/90/120/144 LEDs/m) · IP65 10mm Wide RGB/RGBW/CCT Strip Lights · Compatible Wire Gauge: 18-22AWG Installation Instructions: Method 1: Adhesive Mount (Suitable for Glass, Metal, Wood, Marble) 1. Clean the surface thoroughly for optimal adhesion. 2. Insert the LED strip light from the side of the bracket. 3. Press the strip down until it is secured by the four retaining edges, then close the cover. 4. Remove the protective backing from the 3M tape. Press firmly against the surface for 7-10 seconds. For best results, allow 12 hours of curing time before applying stress. Method 2: Screw Mount (Suitable for Gypsum Ceilings, Walls, Corners) 1. Mark and pre-drill holes using appropriate tools. 2. Secure the bracket to the wall or ceiling using the provided rustproof screws. 3. Insert the LED strip light from the side and press it into the bottom of the clip. 4. Close the cover to secure the strip in place. Package Information: 100PACK ATB-WL00310 Light Clips,100PACK Screws

• · Dual Installation for Any Surface: Achieve a flawless setup with two fixing methods included. Use the strong 3-M V-HB adhesive for smooth surfaces like glass, metal, or wood, or utilize the 102 included rustproof iron screws with advanced oxidation-resistant coating for secure mounting on drywall, gypsum ceilings, or corners.
• · Fit for Slim LED Strips: Specifically designed for widths up to 10.5mm (0.39in) and heights below 2.8mm (0.11in) . Perfectly compatible with IP20/IP65 COB, FCOB, SMD5050, SMD5630, SMD2835, and 10mm wide RGB/RGBW/CCT strip lights. (Note: Not compatible with IP67/IP68 silicone tube lights, neon lights, or specific wide models like Ph-ilips 14mm strips).
• · Secure & Seamless Corner Design: Features a specialized retention structure that holds the LED strip firmly in place without shifting. The low-profile design allows for clean cornering and ensures the strip remains flush against the mounting surface for a professional, finished look.
• · Rustproof & Durable Hardware: Includes 102 matte gray iron screws treated with advanced oxidation-resistant surface treatment to prevent rust. This ensures long-lasting performance even in areas with variable humidity, providing a reliable hold that won't degrade over time.
• · Multi-functional Cable Management: Beyond LED strips, these clips are ideal for organizing and securing small-diameter cables. Perfect for managing Apple, USB Type-C, Network, and 18-22AWG electrical wires to keep your entertainment center or workspace tidy.