Arducam IMX477 Pi HQ Camera for Raspberry Pi 5, Comes with a 1/2.3” 6mm Focal Length CS Lens, Widely Compatible with Raspberry Pi 4B, 3B+, Zero

★★★★★ 4.3 37 Bewertungen

€28.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.2connecttogether.nl
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€28.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 27.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.2connecttogether.nl
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 209092932 Erscheinungsdatum 2026/03/29 Listenpreis €28.00 Modellnummer 209092932
Kategorie
  • Clear Images: This Arducam for Raspberry Pi HQ camera can reach up to 12.3MP and the max still resolution is 4056(H) x 3040(V). This IMX477 Raspberry Pi camera can help you capture sharp and clear images
  • CS Lens: This Pi camera comes with a 6mm focal length CS lens, there is no necessary to look for a CS camera for your HQ camera. With this lens, you can get manual focus and adjustable aperture which help you make capturing high-quality images more convenient
  • Easy to Set Up: This camera comes with 2 cables, a 300mm 22-22pin cable for Raspberry Pi5/Zero, and a 300mm 15-22pin cable for Raspberry Pi 4B/3B... Simply connect the cable and edit the configuration by following the user guide at the first use, it can be used smoothly
  • Wide Compatibility: This hq camera supports to work with most Raspberry Pi boards, such as Raspberry Pi 5, 4B, 3B+, 3B, 2, Raspberry Pi Zero, and Zero 2W. If you need a camera to work with Nvidia jetson boards, please refer to Asins: B08NVH44HB B0B1MNVM16 B08PFJDJC9
  • Note for customers who use a Raspberry Pi 5: Since there are 2 camera ports on Raspberry Pi 5, please remember cam1 is the default one, while you connect the camera to cam0, please use the dtoverlay code: dtoverlay=imx477, cam0

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.3 von 5
★★★★★
37 Bewertungen | 15 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
80% (30)
4 Sterne
6% (2)
3 Sterne
3% (1)
2 Sterne
1% (0)
1 Stern
10% (4)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.