3" Pellet Stove Vent Pipe Kit For Horizontal Installs With A Vertical Rise by Dura Vent Pro

Our kits use only the highest quality pipe by DuraVentThis basic 3-inch pipe kit contains everything you need to vent your pellet stove directly out the wall with vertical rise. This is the most common venting installation. The installer can choose whether to have the vertical rise seen (rise interior) or unseen (rise exterior). It is important to note that if your vertical runs of pipe are more than fifteen feet (15') at this point, the pellet vent pipe should be increased to four inches (4") in diameter. Do not exceed four feet (4') of pipe on a horizontal run, and DO attempt to use the least number of elbows in the flue system. If an offset is used it is better to install a 45-degree elbow whenever possible. NOTE: Installing elbows may inhibit your draft by up to 15% per elbow.Included:1 x Silicone High Temperature Pipe Sealant (76CT)1 x 3" DuraVent Pro Appliance Adapter (3PVP-AD)1 x 3" DuraVent Pro Straight Pipe 6" Length (3PVP-06)1 x 3" DuraVent Pro Straight Pipe Adjustable 12" Length (3PVP-12A)1 x 3" DuraVent Pro Straight Pipe 12" Length (3PVP-12)1 x 3" DuraVent Pro Straight Pipe 24" Length (3PVP-24)1 x 3" DuraVent Pro Wall Thimble (3PVP-WT)1 x 3" DuraVent Pro Horizontal Terminating Cap (3PVP-HC2)1 x 3" DuraVent Pro 90 Degree Elbow (3PVP-E90)1 x 3" DuraVent Pro Clean Out Tee & Cap With Push Button Release (3PVP-TI)1 x 3" DuraVent Pro Adjustable Wall Strap (3PVP-WSA-AMP)Note: The 3" appliance adapter for this will fit all pellet stove with a 3" takeoff except for Harman. Harman Pellet Stoves have their own adapter, part number 3PVP-ADH

• Vertical run just over 3-feet high
• Laser-welded, double-wall pipe with a .012″ inner wall of 444 stainless steel and a .018″ laser-welded galvalume outer wall. Painted black exterior available. Primary metal-to-metal connection seals joint. Encapsulated o-ring provides a secondary seal.
• 1″ clearance to combustibles in the USA and Canada for appliances using corn and other biofuels, wood pellets or oil.
• Rated for continuous use flue temperatures up to 570°F.
• c-UL-us Listed to UL 641 (MH8381 and MH14420). ULC Listed to ULC S609, ULC/ORD C441 (CMH1439 and CMH1440).