3 Cups Wind Speed r Ameter, d Speed Meter r, Wind d h ABS l Cups for Industry Greenhouse

Item Type: Wind Speed rl: ABSSize: Approx. 158x180x70mm / 6.22x7.09x2.76inWeight: Approx. 272g/9.6oz Supply Voltage: DC9-30Vcommunication Type: for (Default for Protocol)u Range: 0～70m/s (Pulse, 485, 232 Output)Exten Line Length at ection: Approx. 0.8m/2.6ftAccuracy: ± (0.5 + 0.02V) m / s (V Represents Real Time Wind Speed Value)Resolution: 0.1m/sStarting Wind Speed: 0.8m/sMaximum umption: 0.48WLoad Capacity: DC12V Supply, t Type Output Impedance 350ΩDC24V Supply, t Type Output Impedance 900Ω, Voltage Type Output Impedance 1KΩg Environment: Temture -35℃～60℃, Humidity 100 Percent RH Without Cnsation IP64Widely Used In: Greenhouse, , Weather observa, Ships, Docks, , Advertising Gates, Meteorology, Marine, Environment, Airports, Ports, Latories, and Transportation and Other Environments of Wind Speed urement.About r communication protocol description :, if you are using a single r ected to computer to read data directly, it is recommended to use 's private protocol (see page 3), you can visualize data in ASCII (hex send, non hex receive);Second, if you are a multi r interection with PLC, contion or programmable collector, it is recommended to use ard for RTU protocol.Third, If there is no special requirement, default device address in r parameters is 1, baud rate = 9600, protocol for RTU.Standard for RTU communication protocols :)Serial FormatData bit 8 bits, stop bit 1 bit, parity bit None, default baud rate 9600bps, serial debugging software set to hex send and receive, two communication intervals of at least 500ms or more, CRC in manual is parity bit, 2 bytes. default device address is 1.for CRC checking steps :.1. Preset 16 bit register to hexadecimal FFFF, call this register as CRC register;2. Isolate 8 bit data with lower bit of CRC register and put result in CRC register;3. check lowest bit by ing contents of register one

• MENT: Our 3 cups wind speed r ameter provides wind speed urements with an accuracy of (0.5 0.02V) m/s, data for industrial, agricultural, and environmental applications. r covers a wide u range of 0-70m/s, g it ideal for various demanding conditions.
• L: wind cups of this ameter are crafted from -strength ABS l, offe excellent -ero performance and a smtup wind speed of 0.8m/s. This performance even in harsh environments.
• TILE APPLICATIONS: This wind speed r is for use in greenhouses, weather observatories, ships, docks, culture, and more. Its weight and portable , a with a 0.8-meter exten cable, s it to inl and use in diverse settings.
• STRONG -INTERFERENCE: ed with robust rference , this wind speed meter r performs reliably in various harsh environments. Its IP64 thstand dust and es, g it suitable for oor use.
• INLATION AND USE: r features two wire output s (bottom and side outlet) and supports protocol for integration with PLCs and other devices. clear wi instructions and troubssup and