223CC 9HP 4-Stroke Gas Powered Earth Auger Post Hole Digger Borer Fence Ground Drill with 16" Auger Bit Set,Single Cylinder Horizontal Engine,for Garden and Lawn Drilling, Digging Post Holes

DetailsFour-stroke Engine: Compared with Two-stroke Excavators, Four-stroke Has the Characteristics of High Power, Fuel Saving, Environmental Protection, and Low Noise, and Has Independent Petrol and Oil Tanks That Can Be Filled Separately Without Matching.Throttle Cable: the High-quality Throttle Cable Makes the Transmission Stable and the Response Flexible.Ball Bearing and Gear Drive: These Two Accessories Can Make the Product Run More Smoothly and Let You Complete More Work in a Shorter Time.Four Handles: Four Steel Ergonomic Handles Are Suitable for Two People to Operate Together, Providing You with Safer and More Convenient Operation.How to UseAdd Engine Oil First, Then Gasoline.After Refueling, Turn on the Flameout Switch (on the Handle).Press the Red Fuel Pump on the Carburetor 2-3 Times.Pull the Starting Handle to Start the Machine.SpecificationsColor: Black & Yellow & GreyMaterial: Aluminum Alloy, Steel, PlasticSurface Treatment: Plastic SprayingUses: Digging HolesDisplacement: 223ccSuitable Maximum Drill Diameter: 60cm/23.62inHorse Power: 9hpEngine Type: Single Cylinder HorizontalEngine Stroke: 4-StrokeFuel Consumption: 395g/Kw·hCooling System: Forced AirAssembly Required: YesMount Type: Floor-standingIgnition System: Capacitance Discharge TypePto Shaft Rotation: Vertical Shaft OutputBore X Stroke: 70*58mm/ 2.76*2.28inTheoretical Maximum Power: 4.1kw/3600rpmRecommended Using Power: 3.5kw/3400rpmMaximum Torque: 12.5n·m/2500rpmFuel Tank Volume: 1l/ 0.26galRecommended Gasoline Type: Above 90 #Drill Size: 40(D)*80(H)Cm/ 15.74*31.49inchHole Digger Total Length: 115cm/45.2inchHole Digger Total Width: 65cm/25.5inchTotal Height: 130cm/51.18inchHeight Without Drill: 53cm/20.8inchHead Size: 40*34cm/15.7*13.3inchHole Digger Package Size: 61*45*54cm/ 24.02*17.72*21.26inHole Digger Gross Weight: 26.8kg/ 59.08lbsDrill Bit Gross Weight: 16.2kg/35.71lbsDrill Bit Package Size: 40.5*40.5*81cm/15.94*15.94*3`.89inch

• Build to Last: High-quality Aluminum Alloy, Steel, Plastic, and Plastic Spraying Process Make This Product Solid, Wear-resistant, Impact-resistant, and Rustproof.the Exhaust Muffler Is Used to Reduce the Noise Disturbance for Your Trenching Operation.
• High Efficiency: the 223cc 4-Stroke Engine, 4100w Power, 3600r/Min Speed, 0.26gallon Oil Tank, Sharp Spiral Drill, and 12.5nm Torque Provide You with Strong Power, so It Can Efficiently Help You Do Various Digging Work.
• Good Heat Dissipation: the Air Cooling Model and Multiple Cooling Holes Can Timely Reduce the Temperature in the Process of Operation and Avoid Potential Safety Hazards, Thus Extending the Product's Service Life. the High-quality Carburetor Makes the Gasoline Fully Burn When Working, and the Fuel Consumption Is Only 395g/Kw·h, so Your Cost Can Be Saved.
• Simple Installation and Use: the Detailed Manual, T-shaped Handle, and Complete Accessories Ensure That You Can Complete the Installation and Start Using It in a Short Time.the Smooth Surface Allows You to Easily Remove Dust and Residues with a Towel and Water.
• Protective Shipping: Foam Can Better Protect Your Product During Transportation so That It Can Be Delivered to You Completely.