1 x Saw Blade Round Milling Cutting Disc Tool CNC Slot Machining Tungsten Carbide Steel Diameter 50-70 mm Slots Metal Slither (63 mm-d16, 2.8 mm)

Saw blade (1 piece). NOTE: Required for use with the tool holder NOT included in this link. Click on the picture below if necessary for purchase. Material: Overall combined with full tungsten steel, cuts iron like mud, with special steel mesh blend processing, shockproof, wear-resistant, high temperature resistance, long service life. Double-sided mirror effect, good gloss. Overall levelling design, smooth surface, smooth and efficient cutting. Craftsmanship: Precision: Inner hole: +0.01-0.02 Outside: ±0.02. Saws: Precision grinding machining of saw teeth, scientific angle design, sharp, smooth processing, no combustion board, no rolling edge, no burr. The thinner the saw blade, the more sensitive it reacts to vibrations and tensile loads during use. Radial or axial strike can easily cause damage. Poor. Therefore, the milling machine should work in a stable state, i.e. the machine tool has high precision, good rigidity of the cutter bar and a stable transmission. Feed quantity per tooth. Constant and sufficient cooling. The specific requirements are as follows: <;0.02mm Face 0.01mm 2. As long as the milling depth of the cutter is not affected, clamp the two sides of the knife to the router bar as much as possible with a large flange plate to eliminate vibration and avoid lateral compression. In general, the diameter of the flange plate is not less than 1/3 of the outer diameter of the saw blade. 3. The linear milling speed Vc and the feed Sz per tooth should be chosen appropriately. In general, the entire hard alloy saw blade cutter can choose Vc faster than the high-speed steel saw blade cutter under the same conditions, but the feed speed per tooth should be lower than the feed speed of high-speed steel. Sz can generally be adjusted between 0.005 and 0.025/tooth. The specific parameters should be determined by the user according to the speed of the milling machine, the characteristics of the cutter, thickness, number of teeth, milling depth and other factors. Vc: P: 70~150, 50~80 k: 80~120 M:70~120 N:200~350 s:20~50 Outside Diameter - Cutting Depth 40 mm - 3 mm. 50mm - 5mm 63 mm - 8 mm. 70 mm - 10 mm. 75 mm - 12 mm. 80 mm - 15 mm. 100mm - 20mm 125mm - 30mm ========== Chemical of particularly concern - None is_customized: yes Origin: Mainland China Design: white. Model Number:Sawmill Blade material: tungsten carbide steel. Size: 40 mm. Number of pieces: 1 piece. Blade type: circular saw blades. Usage: Commercial Manufacturing Teeth: 72

• Size:50-70mm
• Number of pieces: 1 piece
• Blade type: circular saw blades
• Usage: Commercial Manufacturing
• Teeth: 72